Loading ...
Loading ...
Loading ...
11
OPERATING INSTRUCTIONS
WARNING
To reduce the risk of re, personal injury, and product damage due to a
short circuit, never immerse your tool, battery pack or charger in uid
or allow a uid to ow inside them.
Corrosive or conductive uids, such as seawater, certain
industrial chemicals, and bleach or bleach-containing products, etc, can cause a short circuit.
WARNING
If any parts are damaged or missing, do not operate this product until
the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING
Do not attempt to modify this Impact Wrench or create accessories
not recommended for use with this Impact Wrench.
Any such alteration
or modication is misuse and could result in a hazardous condition leading to possible serious
injury.
WARNING
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the Impact Wrench when
assembling parts, making adjustments, cleaning, or performing maintenance.
This cordless impact wrench must be used only with the battery packs and chargers listed
below:
Battery pack
Charger
2Ah 2Ah 2.5Ah 4Ah 5Ah
SKIL
BY519701
SKIL
BY519702
SKIL
BY519703
SKIL
BY519601
SKIL
BY519603
SKIL
SC535801
SKIL
QC536001
NOTICE:
Please refer to the battery and charger manual for detailed operating information.
To Attach/Detach Battery Pack
(Fig.2)
Lock the trigger switch “OFF” on the tool by
placing the direction-of-rotation (forward/cen-
ter-lock/reverse) selector in the center position
before attaching or detaching the battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves of the tool, and then slide the battery
pack onto the tool.
NOTICE:
Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
To detach the battery pack:
Depress the battery-release button located on the front of the battery pack to release the bat-
tery pack. Pull the battery pack out and remove it from the tool.
NOTICE:
When placing the battery pack onto the tool, be sure that the raised rib on the
battery pack aligns with the groove inside the tool and that the latches snap into place
properly. Improper attachment of the battery pack can cause damage to internal components.
WARNING
Battery tools are always in operating condition. Therefore, the
direction-of-rotation (forward/center-lock/reverse) selector should
always be locked in center position when not in use or carrying at your side.
BRUSHLESS
Mode
Fig. 2
Attach
Battery-Release Button
Detach
Loading ...
Loading ...
Loading ...