Loading ...
Loading ...
Loading ...
6
TO INSTALL THERMOSTAT
IMPORTANT: Thermostat installation
must conform to local and national building and
electrical codes and ordinances.
NOTE: Mount the thermostat about five feet above
the floor. Do not mount the thermostat on an outside
wall, in direct sunlight, behind a door or in an area
affected by a vent or duct.
1.
Turn off power to the heating and cooling system
by removing the fuse or switching off the
appropriate circuit breaker.
2.
Remove the cover by inserting and twisting a coin
or screwdriver in the slots on the top of
the thermostat.
3.
Put thermostat base against the wall where you
plan to mount it. Make sure wires will feed through
the wire opening in the base of the thermostat.
4.
With the base level, mark the placement of the
mounting holes.
5.
Set thermostat base and cover away from
working area.
6.
8VLQJDƎGULOOELWGULOOKROHVLQWKHORFDWLRQV
you have marked for mounting.
7.
Use a hammer to tap supplied anchors in
mounting holes.
8.
Align thermostat base with mounting holes and
feed the control wires through the wire opening.
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...