Loading ...
Loading ...
Loading ...
Step 6. Attach the Left and Right Wing to the Platform using (4) #8x1/2" Panhead Screws (as shown in
FIG. 6). The long flanges facing outward and toward edge of Platform.
FIG. 6
#8x1/2" Panhead
Screws
Platform
Step 7. Attach the Wings (with Platform) to the Carriage of the Lift Mechanism by laying the Back (with Lift
attached) in a flat position and aligning the top and bottom holes in Wing flanges with the holes in
the Lift Carriage. Insert the (8) 6mm Hex Head Bolts through the Wings and Carriage and attach a
Washer & Hex Nut to each Bolt (as shown in FIG. 7). Before tightening the Nuts and Bolts using a
10mm wrench or adjustable wrench or pliers, use a square or the bottom shelf of cabinet to square
the platform with the back (as shown in FIG. 7B). Final assembly should look FIG. 7A.
FIG. 7A
FIG. 7
"r-'-"l
I
@
@
Hex Head Nut
FIG. 7B
Washer
Lift Carriage
Machine Platform
6mmxllmm Hex Head Bolt
98400-6
Page 6 98401-6
Loading ...
Loading ...
Loading ...