Loading ...
Loading ...
Loading ...
UnderstandingHowthe "ARROW-LOC" Cam FastenerWorks.
ARROW
TOWARDS
HOLEIN
EDGE
1. Position bolt in 2. Press cam into 3. Insert bolt through
pre-drilled hole and pre-drilled hole until pre-drilled hole in
turn until tight, flush with surface, edge of panel.
4. To lock, rotate cam
until tight, using
allen key provided.
Cabinet Assembly
Step 1. Place Top, Left and Right Sides on a flat protected surface (to prevent scratching of parts),
thread Connecting Bolts (18 total) into pre-drilled holes (as shown in FIG. 1). Install Cams
(18 total) by pushing a Cam into each hole flush with surface, The arrow on the Cams should
be turned (using a regular screwdriver or Allen Key provided) to face the hole in each edge
where the Connecting Bolts will enter.
Step 1A. We are providing (1) White Plastic Hook, to be used to store your Custom Fit Sewing Head
Insert. Install in hole on Left Side Panel (as shown in FIG. 1).
I NOTE:
• = Connecting Bolt
= Cam
FIG. 1
Top Assembly
/iJJ
Right Leaf Left Leaf
Back
./ " .7
Back Brace
Left Side Panel Right Side Panel
Turn over front, tap in (2) Door Catches (be sure to have
the slots go from left to right, as shown in FIG. 1A)
/- #
Front ( Back Side)
/. . .y
Tap in Catches here FIG. 1A
Front (Front Side)
/ 1I /
98400-3
Page 3 98401-3
Loading ...
Loading ...
Loading ...