Loading ...
Loading ...
Loading ...
| KEY DIMENSIONS AND SPECIFICATIONS
Description
Rated Voltage/Frequency
Dimensions
Net "vVeight
Top-Loading Washer
120VAC, 60Hz
27"(W) X 28 3/8"(D) X 41 3/10"(H), 55 3/8"(H with lid open)
68.6 cm (W) X 72.1 cm (D) X 105.0 cm (H), 140.6 cm (H with lid open)
137.8 Ibs. (62.5kg)
CHOOSE THE PROPER LOCATION
WARNING
* Washeris heavy. Two or more peopleare required when
movingand unpackingthe washer. Failureto do so may
result in damage to property or seriousbodily harm.
* Storeand installthe washer where it will not be exposed
seriousinjury, fire, electric shock,or death.
warning can cause seriousinjury,fire, electric shock,or
death.
• Toreducethe riskof electricshock,do notinstall the
washer in humidspaces.Failureto follow this warningcan
cause seriousinjury, fire, electric shock, or death.
• Toensure properair flaw, do not block the large opening
on the bottom of the washer with carpeting or other
materials.
' Do notremoveground prong.Do not usean adapter or
extensioncord. Pluginto a grounded3-prongoutlet. Failure
to follow this warning can cause seriousinjury, fire, electric
shock,or death.
NOTE:Installingthe washer in a humidspace, or installingor
storingthe washer where it will be exposed to the weather or
freezing temperatures, may result inrust or other damage that
is not covered by the product warranty.
PowerOutlet
' The poweroutlet must be within 60 in. (1.5 m) of either side
of the washer.
' The appliance and outlet must be positioned sothat the plug
is easily accessible.
• Do not overload the outlet withmore than
one appliance.
• The outlet must be grounded in accordance with current
wiring electric codes and regulations.
• Time-delay fuse or circuit breaker is recommended.
NOTE:It isthe personal responsibility and obligation of the
product owner to have a proper outlet installeclby a qualified
servicetechnician.
FLOORING
• To minimize noiseand vibration, the washer MUST be
installed on a solidly constructed floor. See the NOTE to your
right.
• Allowable slope under the entire washer is a maximum I in.
difference from side to side or from front to back.
° Installing on carpeting and soft tile surfaces is
not recommended.
• Never install the washer on a platform or weakly
supported structure.
CLEARANCES
7
4! 3/_o"
(105.0 cm)
f
1" ___ 27 ,_ _ !"
(2_5cm) -_ (68.6 cm) (2 5cm}
Toensuresufficient clearance for water lines and airflow, allow
minimumclearances of at least 1 in.(2.5 cm)at the sidesand
4 in.(10 cm)behind the unit.Be sureto allow for wall, door, or
floor moldingsthat may increasethe required clearances.
32"
(81.1 cm)
28 3is" [}1_:
(72.1 cm)
I
55 3/s'
(140.6 cm)
(with open rid)
26 3/4"
(68 cm}
3 !/2"
(9 cm)
Minimum vertical space from floor to overhead
shelves, cabinets, ceilings, etc., is 56 in.
NOTE: The washer must be installed on firm flooring
to minimize vibration during the spin cycle. Concrete
flooring is best, but a wood floor is sumcient, provided
it is built to FHA standards. The washer should not be
installed on rugs or exposed to weather.
Loading ...
Loading ...
Loading ...