Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
HOW TO OPERATE , HOW TO Ac'rUATE SELF FEEDING CUTTING LINE
i. Hold trimmer in e ¢omfo_able upright positlon and depress .... .... ' ....... - ............
trigger switoh.
2: Best resultsare accomplished withpropertength line and main-
taining full speed: Cut only .with the tip of the nylon, line.
WHEN OPERATING
1. The WE.EDWACKER will stir up dustparticles which may get
into your eyes. Wear safety goggles toprevent this. When you
cut to the LEFT SIDE, your WEEDWACKER willsling partioles
FORWARD, away from you. When you.cuttothe RIGHT SIDE,
itwill slingparticles BACK toward you. ALWAYS CUT TO THE
LEFT SIDE ONLY.
2, Your WEEDWACKER can slingobjects withadequate vetoctty
to cause harm to ut.hers. It will ALWAYS sling small particles
of dirt. KEEP PEOPLE AWAY FROM YOU when using your
trTmmerjust to be safe.
1, " Plug.tn'powdf c_'d.
2, Ste_rtmotor
3.. Te_othe..hub lightly on "the tud. Gutting line will advance
automatically while motor is running,
4. Repeat'step number 8-to advance additional cutting line.
UNE |S lrRIMMEO AUTOMATICALLY
Yo.urnew W_DWACKER is q_quipped with a fully automaticI_ne
cut_er.After.artewseotion Ofline is f._.o_._ a-blade mountedin the
gudrd will cut the'line tO.its properlength sutomaticalEy,
Thlsfeature kee_s t_e i_e ti'immed to a sa'fband mestefficisnt cut-
ring,lang., Alwaysmake sure this cutter isWorking efficientlyto
_'tieve.the best.results.
GENERAL TRIMMING
Tiltunitapproxim_e{y30°.tothele_ (F'v3,4)and.cutg..mss_,e_ls
usinga sweepingmotion(righttoleft),ksepingmecuttingne_doff
thegrouqd." - -. " " " "
RG.4
MOWING
STmpiypassyourWEEDWACKERovertheareasyouWishtocut,
keeping thecuffinghead parallelto_e ground.DO NOT usethe
usual 30 .degreecuttinganglewhen mowingasin fig.4.
1;O REPAIRBROKEN CUTTING LINE
1, .Stoptl_ motor :and unplug pOwercord.
2". VisilS_ €_ttfl"ng-line_ be "retrieved withneedienosed pliers.
3,'_ Hub sh_ 10_dep_;essQdand rele_ed while keeping tension
'on the ._ng lin_. One in_h of cutting line should feed each
time the hub is deptesse:d.
4, If cutting llne cannot be retrievod, follow instructions under
SPOOL REPLACEMENT. '
• THE OPERATION OF ANY TRIMMER CANRESUt;T (NFOREIGN Ol§JEGI"SBEING THROWN
iNTO THE EYES, WHICH CAN RESULT IN SEVERE EYE DAMAGE. AINVAYS WEAR SAFETY
GLASSES OR EYE SHIELDS BEFORE COMMENG{NG POWER TOOL'OPERATtON. WE
RECOMMEND WIDE VtS[ON SAFETY MASK FOR OVER SPECTACLES OR STANDARD
SAFETY GLASSES AVAILABLE AT SE_ARSRETAIL OR CATALOG STORES,
4
Loading ...
Loading ...
Loading ...