Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
Remove :I'RIMMER from carton and examine it thoroughly to
make sure It is not damaged.
Remove and discard protective plastic clips Inserted in
handle tubes before assembly of trimmer.
TOOLS NEEDED FOR ASSEMBLY
* Medium Phillips screwdriver
= Adjustable wrench or pliers
ATTACHING THE ASSIST HANDLE AND TUBES
Attach the assist handle tothe upper tube beforejolnlngthe
tubes together(Fig. 1).
1: ..Theharnesswire that"b.ex_sed between the tubes willpass
• through the S_otin me bottom of_he assist handle. "
2. Slide the handle uponto uppeft_be_ " ' " .
3. Place boltintohandle, attach wingnut andtighten.
4: Slide lower_ubeinto upper tube and aE,gn holes.
5. Insert twoscrews through tubes, attach Iocknuts.and tighten
(Rg.2).
6. Adjust positionofassist handle to conformto heightand arm
length.
RETAINING EXTENSION CORD
Loop cord throughcord retainer and around hook (Fig. 3)
Insert cord socketintorecessedtdmmer plug.
BEFORE OPERAI_ING
Before..ustngy_ur TRIMMER :readand understandthe RULES
FOR SA_ OPERATION
• AlwayswearSAFETYGOGGLES.
• ,Gut toyour LEFTside.
• Keeppeople,awayfrom you.
• Inspecttheareasyouare goingtotrimforwires,cordandany
stdng4ik_ematter toprevent*themfrom gettingtangled inthe
cutting'head.
CAUTION: THE CUTTING-BLADE MOUNTED IN THE
REAR GUARD SECTION. IS F-XTREMELY SHARP AND
CARE. SHOULD BE EXERCISED WHEN .HANDLING
OR OPERATING TRIMMER TO AVOID CONTACT WITH
G'UTrER.
._/MAIN HANDLE
YRIGGERSWITCH ,
/
CuTn_GNF_O
t,/ l°°"
FIG.2
FIG. 3 ,OOK
F{G.I
3
Loading ...
Loading ...
Loading ...