Loading ...
Loading ...
Loading ...
5. When the required temperature is reached, you can turn the operation knob to the “O” position.
7. Press the power switch to the “O” position to cut off the power source.
CLEANING AND MAINTENANCE
1、Cut off power source and let the coffee maker cool down completely before cleaning.
2、Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray and
removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.
3、Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then you can clean it
with cleanser, but at last you must rinse with clear water.
4、Clean all the attachments in the water and dry thoroughly.
CLEANING MINERAL DEPOSITS
1. To make sure your coffee maker operating efficiently, internal piping is cleanly and the peak flavor of
coffee, you should clean away the mineral deposits left every 2-3 months.
2. Fill the tank with water and descaler to the MAX level ( the scale of water and descaler is 4:1, the detail
refers to the instruction of descaler. Please use “household descaler”, you can use the citric acid (obtainable
from chemist’s or drug stores) instead of the descaler (the one hundred parts of water and three parts of citric
acid).
3. According to the program of pre-heating, put the metal funnel (no coffee powder in it) and carafe (jug) in
place. Brewing water per “ PRE-HEATING”.
4. Press the power switch to the lower position which is the “ON” position. The power indicator will be
illuminated. The appliance will start heating.
5. Press down the Coffee/steam button to the higher position which is the “ ” position, waiting for a
moment, until the ready indicator lights, it shows the pre-heating is finished.
6. Turn the operation knob to the “ ” position and make two cups coffee (about 2Oz). Then turn it to the
“O” position.
7. Press the coffee/steam switch to lower position which is the position, waiting for until the ready
indicator is illuminated. Turn the operation knob to the “ ”position and make steam for 2min, then turn
the operation knob to the “O” position to stop making steam. Press the power switch to the higher position to
stop the unit immediately, make the descaler deposit in the unit at least 15 minutes.
8. Restart the unit and repeat the steps of 4-7 at least 3 times.
9. Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-7 for 3
times (it is not necessary to wait for 15 minutes in step of 7), then brewing until no water is left in the tank.
TROUBLE SHOOTING
S
ymptom
C
ause
C
orrections
6
Loading ...
Loading ...
Loading ...