Loading ...
Loading ...
Loading ...
7. Let them cool down completely, then rinse under running water.
MAKING CAPPUCCINO
You get a cup of cappuccino when you top up a cup of espresso with frothing milk.
Note: during making steam, the metal funnel must be assembled in position.
Method:
1、Prepare espresso first with container big enough according to the part “MAKE ESPRESSO COFFEE”,
make sure that the operation knob is at the “O”.
2、Press the coffee/steam switch to lower position which is the position, waiting for until the ready
indicator is illuminated.
3
、
Fill a jug with about 100 grams of milk for each cappuccino to be prepared, you are recommended to
use whole milk at refrigerator temperature (not hot!).
Note: In choosing the size of jug, it is recommended the diameter is not less than 70±5mm, and bear
in mind that the milk increases in volume by 2 times, make sure the height of jug is enough.
4
、
Insert the froth device into the milk about two centimetre, then turn the operation knob to the “ ”
position, steam will come out from the steam outlet. Froth milk in the way moving vessel round from
up to down.
5. When the required purpose is reached, you can turn the operation knob to the “O” position.
Note: Clean steam outlet with wet sponge immediately after steam stops generating, but care not to
hurt!
6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten to taste and if
desired, sprinkle the froth with a little cocoa powder.
7. Press the power switch to the higher position to cut off the power source.
Note: after making steam, we recommended you allow the maker to cool down at least for 5 min before
making coffee again. Otherwise burnt odor may occur in your Espresso coffee.
PRODUCING STEAM TO HEAT LIQUIDS OR BEVERAGE
The steam wand can be used to make hot beverages like drinking chocolate, water or tea.
Method:
1. Remove the detachable tank and fill it with desired water, the water level should not exceed the “MAX”
mark in the tank. Then place the tank into the appliance properly.
2. Then connect the appliance to power source. Press the power switch to the lower position, the power
indicator will illuminated.
3. Press the coffee/steam switch to higher position which is the position, waiting for until the ready
indicator is illuminated.
4. Dip the steam wand without froth device sleeve into the liquid to be heated or the intended froth milk.
T
urn
t
he
ope
ration
knob t
o
t
he
“ ” pos
ition
.
5
Loading ...
Loading ...
Loading ...