Loading ...
Loading ...
Loading ...
“ ” position. The water will flow out.
6. After about one minute, turn the operation knob to the “O” position to stop brewing, you can pour the
water in container out then clean them thoroughly, now you can start brewing.
Note: There may be noise when pumping the water on the first time, it is normal, the appliance is releasing
the air in the appliance. After about 20s, the noise will disappear.
PREHEATING
To make a cup of good hot Espresso coffee, we recommend you shall preheat the appliance before making
coffee, including the funnel, steel mesh and cup, so that the coffee flavour can not be influenced by the cold
parts.
1. Remove the detachable tank and open the tank cover to fill it with desired water, the water level should
not exceed the “MAX” mark in the tank. Then place t he tank into the appliance properly.
2. Set steel mesh into metal funnel (without coffee powder), make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the “INSERT” position, and you
can fix them into coffee maker firmly by turning it anticlockwise until it is at the “LOCK” position.
3. Place an espresso cup (your cup) on removable cup shelf.
4. Then connect the appliance to power source. Make sure the operation knob is on the “O” position.
5. Press down the ON/OFF button to the lower position which is the “ ” position. The red indicator will
be illuminated.
6. The appliance will start heating.
7. Press down the Coffee/steam button to the higher position which is the “ ” position, waiting for a
moment, until the ready indicator lights, it shows the pre-heating is finished.
MAKING ESPRESSO
1. Remove the metal funnel by turning it in clockwise, set steel mesh into metal funnel. Add coffee
powder to steel mesh with measuring spoon, a spoon of coffee powder can make about a cup of
top-grade coffee, then press the ground coffee powder tightly with the tamper.
2. Then insert the funnel into the appliance from the “INSERT” position and release the press bar, and
you can fix them into coffee maker firmly by turning it anticlockwise until it is at the “LOCK”
position.
3. Pour out the hot water in the cup. Then place the hot cup (your cup) on removable cup shelf.
4. At the time, the ready indicator is illuminated, turn the operation knob to the “ ” position. The
coffee will flow out.
Note: During brewing coffee or making steam, it is normal that the green indicator is likely to
extinguish, it only means that the heater is heating up to keep the temperature at the standard range.
5.You should turn the operation knob to the “O” position when desired coffee is obtained or the colour of
coffee changes weak obviously, then press the power switch to the higher switch, the power indicator
and ready indicator go out and the coffee maker stops working, your coffee is ready now.
WARNING: Do not leave the coffee maker unattended during making the coffee, as you need operate
manually sometimes!
6. A
fter
f
inishing
m
aking
t
he
c
offee,
y
ou
c
an
t
ake
t
he
m
etal
f
unnel
out by t
urning
i
t
c
lockwise,
t
hen
pour
t
he
c
offee
r
esidue
out w
ith
t
he
s
teel
m
esh
pr
essed
by pr
ess
ba
r.
4
Loading ...
Loading ...
Loading ...