Loading ...
Loading ...
Loading ...
FAQ
EN
212
In video mode, I see ASAASA instead of ISOISO, angle
instead shutter speed and T-exposure values
instead of F-values
CineCine was selected as recording mode Switch from CineCine to VideoVideo mode
There are visible exposure jumps during zooming
The camera is set to Auto ISOAuto ISO Switch to Floating ISOFloating ISO
Review/playback and video/image management
Selected images cannot be deleted Some of the selected images are write protected Remove write protection (using the device with which
the file was originally set to write protected)
File numbering does not start at 1 The memory card contains previously stored images See section “Data Management”
The time and date settings are incorrect or are not
displayed
The camera has not been in use for an extended period
of time (the battery was removed)
Insert a charged battery and configure the correct
settings
The time and date stamp on images are incorrect Time settings are incorrect Set the time correctly
Caution: Time settings will be lost if the camera is not
used/remains in storage with a depleted battery over
an extended period of time
The time and date stamp on images are unwanted Setting was ignored Cannot be removed in retrospect
Deactivate the function as needed
Pictures/recordings are damaged or missing The memory card was removed while the readiness
indicator was flashing
Never remove the memory card while the readiness
indicator is flashing. Charge the battery.
The memory card formatting is faulty or the card is
damaged
Reformat the memory card
(Caution: Loss of data!)
The most recent recording is not displayed on the
LCD panel
Preview is deactivated
Activate PreviewPreview
Parts of my video scenes are not fully in the
picture
Difference of aspect ratios between camera and
playback medium
Set the correct aspect ratio on the camera
Picture quality
The picture is too bright Light sensor was covered while picture was taken Make sure that the light sensor is not obstructed
Image noise Long exposure times (>1s) Activate the noise suppression function for long
exposure times
ISO sensitivity set too high Decrease ISO sensitivity
Unnatural colors White balance not or incorrectly set Adjust white balance to light source or adjust manually
Round white stains, similar to soap bubbles Flash photography in very dark environment: Reflection
of dust particles
Deactivate the flash
Loading ...
Loading ...
Loading ...