Loading ...
Loading ...
Loading ...
SWITCH
See Figure 3
To turn your drill ON, depress the switch trigger. To turn it
OFF, release the switch trigger
FORWARD/ REVERSE
SELECTOR
CENTERPOSITION
SWITCH
TRIGGER Fig 3
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed and torque with increased trigger pressure Speed is
controlled by the amount of switch trigger depression
Note: You might hear a whistling or ringing noise from the
switch during use Do not be concerned, this is a normal
part of the switch function
TWO-SPEED GEAR TRAIN
See Figure 4
Your drill has a two-speed gear train designed for drilling
or driving at LO (1) or HI (2) speeds. A slide switch is
tocated on top of your drill to select either LO (1) or HI (2)
speed. When using drill in the LO (1) speed range, speed
wilt decrease and unit will have more power and torque
When using drill in the HI (2) speed range, speed wilt
increase and unit will have less power and torque Use
LO (1) speed for high power and torque applications and
HI (2) speed for fast drilling or driving applications.
TWOSPEED
GEARTRAIN(HI-LO)
LO
SPEED
HI
SPEED
TO INSTALL BATTERY PACK
[] Lock switch trigger on your drill by placing the direction
of rotation selector in center position See Figure 6
[] Place battery pack in your drill. Align raised rib inside
drill with groove on battery pack See Figure 5.
BATTERYPACK
LATCHES
DEPRESSLATCHESTO
RELEASEBATTERYPACK
Fig, 5
[] Make sure the latches on each side of your battery
pack snap in place and battery pack is secured in drill
before beginning operation=
_ CAUTION: When placing battery pack in your drill,
be sure raised rib inside drill aligns with groove on
battery pack and latches snap into place properly
Improper assembly of battery pack can cause
damage to internal components
TO REMOVE BATTERY PACK
I_f Lock switch trigger on your drill by placing the direction
of rotation selector in center position. See Figure 6
la Locate latches on end of battery pack and depress to
release battery pack from your drill See Figure 5
[] Remove battery pack from your drill
Fig. 4
9
Loading ...
Loading ...
Loading ...