Loading ...
Loading ...
Loading ...
CHUCKREMOVAL
See Figures t4, 15, and 16.
The chuck must be removed in order to use some
accessories To remove:
[] Lock the switch trigger by placing the direction of
rotation selector in center position. See Figure 6
[] Insert a 5/16 inch or larger hex key wrench into the chuck
of your drill and tighten the chuck jaws securely.
[] Tap the hex key wrench sharply with a mallet in a
clockwise direction See Figure 14.This will loosen time
screw in the chuck for easy removal.
MALLET
[] Insert hex key wrench in chuck and tighten chuck jaws
securely. Tap sharply with a mallet in a counterclock-
wise direction,, This will loosen chuck on the spindle It
can now be unscrewed by hand, See Figure 16.
CHUCKJAWS
\
HEXKEY ,_ KEYLESSCHUCK
WRENCH
Fig.. 14
[] Open chuck jaws and remove hex key wrench. Remove
the chuck screw by turning it in a clockwise directionr
See Figure 15_
Note: The screw has left hand threads.
Fig I5
Fig 16
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on spindle and develop a
wobble Periodically check chuck screw for tightness
To tighten, follow these steps:
[] Lock the switch trigger by placing the direction of
rotation selector in center position See Figure 6
[] Open the chuck jaws.
[] Insert hex key wrench into chuck and tighten chuck
jaws securely. Tap hex key wrench sharply with a
mallet in a clockwise direction This will tighten chuck
on the spindle
[] Open the chuck jaws and remove hex key wrench.
[] Tighten the chuck screw
Note: The chuck screw has left hand threads
I3
Loading ...
Loading ...
Loading ...