Loading ...
Loading ...
Loading ...
reassembling the pedestal
installing the poles
For 42-,50- Plasma .........................
television (Outside) :
Base
Pole
Securing the poles
Front
Insert the poles into the left and right holes in the
underside of the base so that they fit securely as
shown in the illustration above.
reSet-up
®Carry out work on a horizontal and level surface,
%
/
Pole --
Base
Use the assembly _A_screws to secure the poles firmly
to the bottom of the base.
Note )
Forcing the assembly screws the wrong way will strip
the threads,
Bottom view
Rear side
Hole for pedestal
installation
Pole
® Fix securely with assembly
screws _.
(Total 4 screws)
Warning
Do not disassemble or modify the pedestal.
®Otherwise the TV may fall over and become damaged, and personal injury may result.
Accessories
Assembly screw
(4 of each)
M5 x 20
M5 x 30
Pole (2)
Base (1)
Caution
Do not use any television or displays other than those given in this Operating Instructions.
®Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
® If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set=up, make sure that all screws are securely tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to
support the TV, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the TV.
® If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
®
3>
O
O
(1)
o0
o0
o
o0
0
©
3>
o
©
©
7
Loading ...
Loading ...
Loading ...