Loading ...
Loading ...
Loading ...
26
MAINTENANCE INSTRUCTIONS
■
Clean lint screen before and after each cycle.
■
Removing accumulated lint:
From inside the dryer cabinet:
Lint should be removed every two years or more often,
depending on dryer usage. Cleaning should be done by a
qualified person.
From the exhaust vent:
Lint should be removed every two years, or more often,
depending on dryer usage.
■
Keep area around dryer clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
■
Keep dryer area clear and free from items that would obstruct the
flow of combustion and ventilation air.
If dryer does not operate, check the following:
■
Electrical supply is connected.
■
Circuit breaker is not tripped or house fuse is not blown.
■
Door is closed.
■
Controls are set in a running or “on” position.
■
Cycle has been selected.
■
For gas dryers, check that gas supply shut-off valves are set
in open position.
IF YOU NEED ASSISTANCE
Contact your authorized Commercial Laundry distributor. To locate your authorized Commercial Laundry distributor, or for web inquiries, visit
www.whirlpoolcommerciallaundry.com.
If you cannot locate your distributor, the Commercial Laundry Support Center will answer any questions about operating or maintaining your
dryer not covered in the Installation Instructions.
Just dial 1-800-662-3587 — the call is toll free.
When you call, you will need the dryer model number and serial number. Both numbers can be found on the serial-rating plate located in the
dryer door opening.
Loading ...
Loading ...
Loading ...