Loading ...
Loading ...
Loading ...
21
D
D
A
A
E
B
C
B
C
E
Remove Terminal Block Cover
Before you start, disconnect power. Remove hold-down
screw (D) and terminal block cover (A).
A. Terminal block cover
B. External ground conductor screw
C. Center terminal block screw
D. Hold-down screw
E. Neutral ground wire
Direct Wire Strain Relief
1. Insert strain relief.
Unscrew the removable conduit connector (A) and any screws from
a from a 3/4" (19 mm) UL Listed strain relief. Put the threaded
section of the strain relief (C) through the hole below the terminal
block opening (B), screw the removable conduit connector (A) onto
the strain relief threads.
B
A
C
2. Insert conduit into strain relief and tighten clamp.
Put direct wire cable through the strain relief. The strain relief should
have a tight fit with the dryer cabinet and be in a horizontal position.
Tighten strain relief screw against the direct wire cable.
Loading ...
Loading ...
Loading ...