Loading ...
Loading ...
Loading ...
Figure 38 Figure 39
3,
When making next penetration, leave a gap
between the first and second holes, See Figure 38,
4, Once the desired Uengthof the mortise is achieved,
go back and chiseUout the remaining gaps, This
wHUensure a smooth, dean mortise, See Figure 39,
NOTE: BUuing of the chiseU is not indicative of a dull
chisel but a combination of friction and resin buildup
on the cutting faces of the chisel A dull chiseU can be
detected by the amount of excess force required to
compUete a cut,
23
Loading ...
Loading ...
Loading ...