CM61082-S User Manual

Loading ...

13 - ENG

NOTICE: DO NOT attempt to increase pump pressure. A higher pressure setting

than the factory set pressure may damagepump.

DIAL-N-WASH ADJUSTMENT (FIG. 6, 7) (IF EQUIPPED)

1. Choose the correct high pressure nozzle (0˚, 15˚ or 40˚) for the job to be

performed. Refer to How To Use SprayWand.

2. The Dial-N-Wash is shipped in the MAX pressure setting, the MAX pressure

bar is aligned with the arrow (R) on the collar as shown in Figure 6.

Rotating the Dial-N-Wash (L) counterclockwise until it stops places it in the

MIN pressure setting, the arrow (R) will align with the MIN pressure bar as

shown in Figure 7.

Adjust the pressure by rotating the

Dial-N-Wash (L) clockwise for

higher pressure or

counterclockwise for lower

pressure, aligning the arrow with

the desired pressure bar on the

Dial-N-Wash.

NOTE: To apply chemicals the black low pressure nozzle must be installed and

the Dial-N-Wash must be in the MAX pressuresetting.

HOW TO USE SPRAY WAND

The nozzles for the spray wand are stored in the nozzle holder on the panel assembly.

Colors on the panel identify nozzle location and spray pattern. Refer to the following

chart to choose the correct nozzle for the job to beperformed. NOTE: Some models

may not include all of the nozzles shown in the chart.

CHANGING NOZZLES ON SPRAY WAND (FIG. 8)

DANGER: Risk of fluid injection. Do not direct discharge stream toward

persons, unprotected skin, eyes or any pets or animals. Serious injury

willoccur.

WARNING: Flying objects could cause risk of serious injury. Do not

attempt to change nozzles while pressure washer is running. Turn engine off

before changingnozzles.

1. Pull quick-connect coupler (E) back and insert nozzle (K).

2. Release quick-connect coupler and twist nozzle to make

sure it is secure incoupler.

WARNING: Flying object could cause risk of serious

injury. Ensure nozzle is completely inserted in quick-

connect socket and quick-connect collar is fully engaged

(forward) before squeezing guntrigger.

Loading ...

User Manual - Page 13