Loading ...
Loading ...
Loading ...
Attach Window Filler Panels to Window Frame
Install Window Sash Seal and Safety Lock
Attach the EVA Foam
1.
Insert foam seal behind the top of the lower window
sash and against the glass of the upper window.
2.
Attach right angle safety lock to top window sash
as shown .
safety lock
3. If necessary, trim weather seals to needed length,
peel off protective backing, and use to plug any gaps.
A
B
C
A Window sash .
B. Hole in side curtain
C.
3/4" screw
3/4" screw
2.Use a 1 drill bit to drill a starter hole through the /8"(3mm)
hole in the top rail.
1.Pull the left-hand curtain out until it fits into the window channel.
3.Insert one of the 3/4"(20mm) screws through the left-hand
curtain and into the window sash.
In order to minimize air leaks and ensure optimal
insulation, it is necessary to install the EVA Foam on
the Curtain housing.
After the unit is installed to the window, measure
the inner width of the side curtain as shown.
1. Put one EVA Foam on the Curtain housing.
9
Measure the inner width
of the side curtain
2. Remark a line on the EVA Foam according to less 1/8
(3mm) than the measured width in, then cut the EVA
Foam along the line.
3. Remove the backing from the EVA Foam.
Attach one EVA Foam on the Curtain housing
adhesive Curtain housing
, the side
with should facing the .
The EVA Foam is not need to attach for Models:
12K cooling and heating
B
A
A. Curtain housing
B. EVA Foam
B
A
NOTE:
A. Top of lower window sash
B Foam seal.
A
B
Loading ...
Loading ...
Loading ...