Loading ...
Loading ...
Loading ...
Checking Oil Level
1. Make sure pressure washer is on a level surface.
2. Remove oil dipstick and wipe dipstick with clean
cloth. Replace and tighten dipstick. Remove and
check oil level.
3. Verify oil is at FULL mark (top hole) on dipstick.
Replace and tighten dipstick.
Adding Engine Oil
1. Make sure pressure washer is on a level surface.
Checking Oil Level.
NOTICE
not start, or hard starting.
• If over the FULL mark on dipstick, drain oil to reduce oil
level to FULL mark on dipstick.
4. Replace and tighten dipstick.
Changing Engine Oil
change oil more often.
KEEP OUT OF REACH OF CHILDREN.
DON’T POLLUTE. CONSERVE
RESOURCES. RETURN USED OIL TO
COLLECTION CENTERS.
Change oil while engine is still warm from running,
as follows:
fuel tank is empty.
2. Disconnect spark plug wire and keep it away from
spark plug.
dipstick. Wipe dipstick clean.
away from spark plug. When crankcase is empty,
return pressure washer to upright position.
to Full mark (top hole) on dipstick.
6. Wipe dipstick clean each time oil level is checked.
7. Replace and tighten dipstick.
8. Wipe up any remaining oil.
Service Air Cleaner
if you run it with a dirty air cleaner. Service more
often if operating under dirty or dusty conditions.
center.
To service the air cleaner, follow these steps:
1. Slide air cleaner lever (A) to unlock (
) position
and tilt cover (B) down.
3. Wash foam air cleaner (C) in liquid detergent and
water. Squeeze dry in a clean cloth.
4. SATURATE foam air cleaner in engine oil and
D).
6. Tilt cover up and slide lever to lock (
) position.
NOTICE
calling 1-888-331-4569.
Service Spark Plug
Changing the spark plug will help your engine to start
1. Clean area around spark plug.
2. Remove and inspect spark plug.
or porcelain is cracked. Use the recommended
replacement plug. See Specications.
CAUTION Avoid prolonged or repeated skin
contact with used motor oil.
Full
Add
20
D
C
B
A
Loading ...
Loading ...
Loading ...