Loading ...
Loading ...
Loading ...
Selector Nozzle Maintenance
A pulsing sensation felt while squeezing the spray gun
nozzle clogged or restricted with foreign materials, such
2. ALWAYS point spray gun in a safe direction, press
release retained high water pressure.
3. Remove selector nozzle from end of nozzle
4. Use a small paper clip to free any foreign material
clogging or restricting each nozzle (A) in the
selector nozzle.
Check that high pressure hose is connected to
spray gun and pump. Turn on water.
10. Start engine following instructions How to Start
Your Pressure Washer.
pattern.
O–Ring Maintenance
Purchase an O–Ring Repair Kit, Sears item 75116, at
1-888-331-4569 or online
at www.sears.com. It is not included with the pressure
washer. This kit includes replacement o-rings and a
in the kit to service your unit’s o-rings.
ENGINE MAINTENANCE
Oil
Oil Recommendations
We recommend the use of Briggs & Stratton Warranty
SG, SH, SJ or higher. DO NOT use special additives.
Outdoor temperatures determine the proper oil
* Below 40°F (4°C) the use of SAE 30 will result in hard
starting.
oil consumption. Check oil level more frequently.
WARNING The high pressure stream of water
that this equipment produces could cut
through skin and its underlying tissues,
amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected, which
could result in serious injury.
• Keep high pressure hose connected to pump and spray
gun while system is pressurized.
• ALWAYS point spray gun in safe direction, press red
pressure, every time you stop engine.
WARNING The high pressure stream of water
that this equipment produces could cut
through skin and its underlying tissues,
amputation.
• NEVER repair leaking connections with sealant of any
kind. Replace o-ring or seal.
WARNING Unintentional sparking could cause
death or serious injury.
WHEN ADJUSTING OR MAKING REPAIRS TO YOUR
PRESSURE WASHER
• Disconnect the spark plug wire from the spark plug and
place the wire where it cannot contact spark plug.
WHEN TESTING FOR ENGINE SPARK
• Use approved spark plug tester.
• DO NOT check for spark with spark plug removed.
A
Loading ...
Loading ...
Loading ...