Loading ...
Loading ...
Loading ...
15
Cleaning and Applying Detergent
To apply detergent, follow these steps:
1. Review use of selector nozzle.
NOTICE Use standard detergent siphon hose &
with the pressure washer.
NOTICE
3. Make sure SOAP spray pattern nozzle is selected
on selector nozzle
NOTICE
MAX, GENERAL, DELICATE or FLUSH spray pattern
nozzles.
4. Make sure garden hose is connected to water inlet.
Check that high pressure hose is connected to
spray gun and pump. Turn on water.
NOTICE
the engine.
• Starting the engine without all the hoses connected and
without the water turned ON could damage the pump.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
5. Start engine following instructions How to Start
Your Pressure Washer.
6. Apply detergent to a dry surface, starting at lower
using long, even, overlapping strokes.
washing and rinsing. Reapply as needed to prevent
surface from drying. DO NOT allow detergent to dry
on (prevents streaking).
Pressure Washer Rinsing
For Rinsing:
1. Select and change to desired spray pattern nozzle
on selector nozzle. See How To Use Selector
Nozzle.
2. Keep the spray gun a safe distance from the area
you plan to spray.
3. Apply a high pressure spray to a small area, then
check the surface for damage. If no damage is
found, it is okay to continue cleaning.
down with same overlapping strokes as you used
for washing and applying detergent.
Automatic Cool Down System (Thermal
Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the
spray gun, circulating water in the pump can reach
discharging the warm water onto the
ground.
WARNING Chemical Burn Hazard.
death or serious injury.
• DO NOT use caustic liquid with pressure washer.
• Use ONLY pressure washer safe detergents/soaps.
Follow all manufacturers instructions.
WARNING
cause you to fall resulting in death or serious
injury.
Loading ...
Loading ...
Loading ...