Loading ...
Loading ...
Loading ...
22 23
BLEND
MODE
The default mode is Blend Mode. When you plug in the
Power Base, you are in Blend Mode.
When you rotate a Vessel clockwise on the Power
Base, the safety interlock engages, the GREEN LED
light illuminates and Blend Mode runs for 60 seconds.
The unit stops and the LED light turns off.
HOW IT WORKS
CAUTION:
• Do not run for more than 3 consecutive 1-minute intervals to prevent
overheating of the mixture.
• Friction from the rotating blades when extracting can cause ingredients to
heat and generate internal pressure in the sealed vessel which may cause the
container to separate and cause personal injury. If the vessel is warm to touch,
allow to cool before carefully opening pointed away from your body.
4
To blend, push and twist the
vessel clockwise onto the Power
Base. The Extraction Process
lasts 1 minute. If more extraction
is needed, wait 1 minute, then
repeat the Extraction Process up
to 3 times as needed to achieve
the desired consistency. If more
than three 1-minute extractions
are needed, allow the Power Base
to cool for 2-3 minutes after the
third extraction before beginning
the next round. You can see the
Extraction Process happening.
Keep an eye on the consistency.
Your NutriBlast is ready when it
looks smooth and creamy!
5
To manually stop the Extraction
Process, simply twist the vessel
counter-clockwise to disengage
the safety interlock. Once the
Power Base and Blade stop
completely, remove the vessel
from the Power Base.
1
Fill ingredients into the vessel.
2
Add the liquid of your choice up to
the MAX line. (Liquid is required!).
3
Twist the Extractor Blade onto the
vessel and hand tighten to make
sure the vessel has been sealed.
PULSE
PULSE
— MAX —
— MAX —
Loading ...
Loading ...
Loading ...