Loading ...
Loading ...
Loading ...
Press DISPLAY
to display or remove the overlay.
Channel Caption
(See page 28.)
Function Status
\_. Current Time Counter
Remaining
(OTR mode only,
see page 14.)
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to "OFF" (see
page 27), the screen will turn solid blue.
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See page 28.)
Time Stamp Data Tape Speed
(See page 29.)
Warning and Instruction Displays These displays will alert you to a missed
operation or provide further instructions.
[o],.1m] [a,_'[H_l
NOCH FOUNDPLEASE CHECK
ANTENNA CABLE CONNECTION
THEN PUSH CH UPKEYAGAIN
PLEASESETCLOCKBEFORE
PROGRAMMING
• If no active channels are found for CHANNEL
MEMORY...
If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
CHECKCASSETTERECORD TAB • If you press REC, and a cassette is inserted with
no record tab...
TOCANCEL TIMERRECHOLDDOWN
STOPKEYFORAPPROX3SEC
NO CASSETTE •
PLEASE INSERTA CASSETTE
PLEASE PREPARE FOR TIMER REC •
VIDEO HEADS MAY NEED CLEANING •
PLEASE INSERTHEAD CLEANING
CASSETTE OR REFER TO MANUAL
END:PLAY KEY
: VCR LOCKACTIVATED : •
• If you press STOP during a Timer Recording...
If you press PLAY, FF, REW, or REC without a
cassette inserted...
If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a
Timer Recording is about to begin...
If head cleaning becomes necessary while playing
back a tape...
If you press a function button other than STOP/EJECT
or POWER while the unit is in VCR Lock mode...
8-13
4,14
23
14
22, 23
34
27
Loading ...
Loading ...
Loading ...