Loading ...
Loading ...
Loading ...
26
FUNCTIONS
Used when cleaning the anus
Always sit in the center of the toilet seat. Never perch or sit on the edge of the seat as the seating sensor will not be
activated properly.
If the water entry temperature is 15℃ or lower, the temperature of the cleaning water may become lower than the set
temperature (other operations work normally).
If the water pressure is strong (especially while using TURBO or POWER CLEAN function), the temperature of the
cleaning water may become lower than the set temperature.
In such cases, adjust the water pressure level to 3 or below for use.
If you stay seated on the seat or use the product in the hot air dry mode for a long time, you may get a
low-temperature burn.
When used by the following persons, please set the SEAT TEMP. button to "OFF" or "Level 2" for use.
When used by children, senior citizens, those with vulnerable skin, those who are unable to control their own body
temperatures, those who have taken sleep-inducing drugs (sleeping pills or cold medicine), those who are hungover
or fatigued, it may cause a low-temperature burn or an accident.
Cleaning for women
Turbo water streams massage the
anus to induce active and satisfying
bowel movements.
This mode is more powerful than
the default rinse mode.
This mode uses varied water pressure
and an effective sequence of settings
to ensure a deep clean.
Adjusts the seat temperature from
Level 0 to Level 3
Turns the mood lamp on when
pressed once.
Turns off the mood lamp with a
second press.
(differentiated by sound)
If the Deodorize button is pressed during
use, the deodorization function is activated.
Press while the bidet is in use to deodorize
Press once more to cease deodorization.
(The Deodorize function can be used selectively.)
(A deodorization filter is installed inside the main frame.)
＊ The Deodorize function is used to eliminate
bathroom odors.
(CBT-IS1131REW, CBT-IS1131RRW)
Press the button once to turn ON/OFF
the Power Save function. The ECO
function can be used by pressing the
button briefly.
＊Press and hold the button for 3 seconds to use the
mood lamp function. If you press and hold the button
for 3 seconds once more, the mood lamp function is
canceled.(CBT-IS1131REW, CBT-IS1131RRW)
＊ Cleans the nozzle
＊ To move the nozzle back and forth for
automatic cleaning, press the
button briefly
＊ To move the nozzle all the way forward
for 2 minutes, press and hold the button
Adjusts the water temperature from
Level 0 to Level 3
Adjusts the nozzle's position from
front to rear
Initiates hot air drying
• Automatically shuts off after 3 minute
＊ Dries quicker if you wipe off the
waterdrops with a tissue,
etc. before drying.
Emits soft water streams to
automatically proceed from
cleaning to drying
• Automatically stops after 1 minute of
cleaning and 3 minutes of drying
(CBT-I1030RW)
Adjusts the water pressure and
hot air temperature from
Level 1 to Level 5
(CBT-IS1131REW,
CBT-IS1131RRW)
(CBT-I1030RW)
Loading ...
Loading ...
Loading ...