Loading ...
Loading ...
Loading ...
Howtouse the Unicoupleonconvertiblemodels
Beforeoperating
yourdishwasher
the
firstWmL.
Attach the Aerator FkKx3t
Adapter
The special aerator faucet adapter
supplied with yourdishwasher
must be assembled to the sink
faucet spout before you can use
yo~r dishwasher.
Howtoconnectthe
1.Pull Unicouple and its hoses
from storage compartment located
at rearof dishwasher and attach it
to the faucet adapter.
The faucet adapter is designed to
fit standard spouts having internal
or external threads. Youwill find
the adapter and two washers in
the “Hardware for Installation”
packet in your dishwasher.
Toinstall faucet adapler, first
removethe old aerator or trim ring
on your faucet spout.
If faucet has external threads:
Insert the thinner of the two
washers into the faucet adapter
and attach it to the faucet spout.
If faucet has internal threads:
==Q
$EiB
p
v
\r
Insert both washers into the faucet
adapter and attach it to the faucet
spout.
If the faucetadapter threads do
not match your faucet spout,
your local hardware or plumbing
supply store normally has
additional fittings to adapt your
faucet spout to the special aerator
faucet adapter.
MNIE: A sink spray attachment
.k2se
can burst if it is installed on
the same sink with your dishwashe~
M.@suggest that you disconnect
the
sink sprayattachment if your
sink has one am’ plug the hole.
2. Attach the Unicouple connector
to the faucet adapter by depressing
collar at the top of the connector.
When Unicouple is all the way up
onto the adapter, releasethe collar.
It will then snap into position to
lock the Unicouple in place.
The Unicouple’s small hose carries
water from the faucet to the
dishwasher. Its large hose carries
drain water to the sink. Be sure
drain hose is pointing toward the
sink bowl drain opening and the
sink drain is open for water that
will drain from your dishwasher. If
your dishwasher drains into a dis-
poser,operate the disposer until it
is completely empty before start-
ing the dishwasher.
3. Turn hot water fully on before
starting the dishwasher.
The Faucet-Flo nozzle is part of
the Unicouple connector. Operate
the nozzle by depressing the
pressure release lever on the side
of the Unicouple connector. You
will find the Faucet-Flo nozzle
useful for several reasons:
@It allows you to flush cold water
out of the hot water line so that
you can better regulate your water
temperature.
@It allows you to test the
temperature of the water before
starting your dishwasher.
If you needfreshwater for
personaluse:
Disconnect the Unicouple.
Drawyour fresh water directly from
your faucet.
Do not disconnect the Unicouple
while the dishwasher is operating.
How to disconnectthe
Unicoupiefromfaucet
adapter.
‘t.
Turnoff the hot water.
2. Releasethe water pressure by
depressing the pressure release
lever.This relieves water pressure
and protects you, and the room,
from severesplashing.
3. Release Unicouple from faucet
by depressing the coliar at the top
of the Unicouple connector.
How to disconnect your
convertible dishwasher
1. Removethe power cord
plug
fromthe wall receptacle.
2. DisconnectUnicouplefrom
faucetadapter.
3.Shakeexcesswaterout of
Unicoupleandreturnit and its
hosesto thedishwasherstorage
compartment.
NOTE:W/henmotorstopsat the
endof the final
rinse, the Uni-
coupie can be disconnected and
returned to storage.
Loading ...
Loading ...
Loading ...