Loading ...
Loading ...
Page 3 of 4
ASSEMBLY INSTRUCTIONS (continued)
211019
5. Fixing the light base on the outlet
box at the wall by two screws
(BB). Reattach the lamp shade to
the light base.
6. Close the fixture cover and tighten
the 2 mounting screws.
7. Caulk around the mounting plate
and surface with silicone sealant
(not included).
7
OPERATIONAL INSTRUCTIONS
Dusk-to-dawn operation enables the light fixture to automatically turn ON when dark outside and turn OFF when the
sun rises, thus saving you energy.
TIP: To test if the light fixture and photocell works properly run power to the fixture and cover the photocell to turn fixture
ON. Shine a light into the photocell to see if fixture turns OFF.
Note: If photocell on the top of the light fixture is located in an area under heavy shade the photocell may not
detect enough light and may turn the light fixture on.
LOCATION: Fixture can be wall mounted.
Fixture designed for wall mount above 4 ft. only. Mount fixture to a grounded standard junction box marked for use in
wet locations. Suggest to install the light fixture between 9 ft. and 20 ft.above the ground.
5
Outlet Box
BB
6
Screw
The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.
Spare Parts List:
Assembly Kit
6441MM (1 SET)
Mounting Screw
X2
AA BB
CC
Gasket
X1
Wire Connector
X3
● To clean, turn off and wipe with a damp, non-abrasive cloth.
● Do not use paints, solvents or other chemicals on this light fixture .They could cause a premature deterioration of
the finish. This is not a defect in the finish and will not be covered by the warranty.
CARE AND MAINTENANCE
Loading ...