Loading ...
Loading ...
Loading ...
7
Additional Programming Functions
VACATION MODE
a. Input the Admin Passcode
b. - Green light and beep
c. 10
d.
e. 1
f. - Green light and beep
DISABLE VACATION MODE
a. Press
button for 3 seconds
b. Input the Admin Passcode
c. - Green light and beep
Restore Factory Settings
a. Press the reset button on the PCB board until you hear one beep. Release, and then three seconds later
you will hear a second beep after three seconds. This indicates that the lock has been reset to the
Factory Settings. (Remove cover, The reset button is located inside the back panel, See image below)
b. The Administrator of the lock deletes the lock from the App (Must be done near lock)
Reset Button
OR
TURN ON/OFF AUTO LOCK FUNCTION
a. Input the Admin Passcode
b. - Green light and beep
c. 5
d.
e. Input time (20 - 900 seconds, and 00 to turn off)
f. - Green light and beep
SOUND OFF
a. Input the Admin Passcode
b.
- Green light and beep
c. 6
d.
e. 1
f. - Green light and beep
SOUND ON
a. Input the
AP
b. - Green light and no beep
c. 6
d.
e. 2
f. - Green light and beep
You can also use the APP to make these changes
Loading ...
Loading ...