Loading ...
Loading ...
Loading ...
Operating Instructions
Getting Started
1. Load dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Select wash cycle (See Cycle Chart).
5. Select desired energy OPTIONS (See Energy
Options).
6. See page 12 for instructions on connecting the
portable dishwasher.
7. If using Wash Delay, go to step 9.
8. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
9. To start, close door to latch. The ON indicator
light will glow throughout the wash, rinse and
dry portions of cycle.
Wash Delay
Allows you to delay starting the POTS PANS or
NORMAL WASH cycle.
• Press POTS PANS or NORMAL WASH
button and select desired OPTIONS.
• Turn dial to number of hours for wash delay.
• Close door to latch.
Plate Warmer
For warming dishes and serving plates before
serving hot foods.
• Load clean plates and dishes to be warmed.
• Turn dial to PLATE WARMER.
• Select heat dry option.
Cycles
Pots
Pans
Heavy
Wash
Normal
Wash
Water
Miser
Rinse
Hold
Description
For pots, pans, casseroles
and dinnerware with dried-on
or baked-on soils.
For heavily soiled dishes and
silverware.
For regularly soiled dishes
and silverware.
For lightly soiled or pre-rinsed
dishes and silverware.
For rinsing dishes that will be
washed later.
Cycle Chart
To Select Cycle
• Press POTS PANS button.
• Select desired OPTIONS.
• Turn dial to POTS PANS.
• Press POTS PANS button.
• Select desired OPTIONS.
• Turn dial to HEAVY WASH.
• Press NORMAL WASH button.
• Select desired OPTIONS.
• Turn dial to NORMAL WASH.
• Press NORMAL WASH button.
• Select desired OPTIONS.
• Turn dial to WATER MISER.
• DO NOT USE detergent.
• Press NORMAL WASH button.
• Select NO HEAT DRY option.
• Turn dial to RINSE HOLD.
Water
(approx.)
9.3 gal.
35.2 liters
8.0 gal.
30.3 liters
6.7 gal.
25.4 liters
5.3 gal.
20.1 liters
1.3 gal.
4.9 liters
Time
(approx.)
90 min.*
84 min.*
78 min.*
72 min.*
9 min.
Washes/
Rinses
2 washes
5 rinses
2 washes
4 rinses
2 washes
3 rinses
1 wash
3 rinses
1 rinse
* Includes dry time.
Energy Options
Water Heat Option
When WATER HEAT option is selected, the
heating element in bottom of tub will raise the
main wash water temperature to approximately
140°F. Wash action will continue but timer will not
advance until this water temperature has been
reached. The hotter water provided by this option
helps activate dishwasher detergent to clean food
grease and soil from dishes. WATER HEAT option
can be used with any cycle except RINSE HOLD.
The WATER HEAT light will glow until the water
temperature reaches 140°F. To turn off option
press RESET OPTIONS.
No Heat Dry Option
NO HEAT DRY option saves electricity. The
heating element stays off during drying portion of
cycle. Additional drying time may be required, with
door open, to completely air dry dishes. Some
water droplets may remain on door and in areas
where dishes touch dishwasher basket or rack.
To turn NO HEAT DRY option off and select a
heated drying cycle, push the RESET OPTIONS
button. If NO HEAT DRY option is not selected, a
heated drying cycle is automatically provided. NO
HEAT DRY option must be selected with the
RINSE HOLD cycle.
The drying option may be changed at any time
during the cycle and affects only the drying period.
Loading ...
Loading ...
Loading ...