Loading ...
Loading ...
Loading ...
Making small level adjustments between doors.
If the door of the freezer is lower than that of
the fridge.
,, Adjustment part.
If the door of freezer is higher than that of the
fridge.
f
Adjustment part
Please open the doors and adjust them as follows:
1) Release the nut (d)) on the lower hinge until it reaches the upper end of the bolt (@).
@
NOTE
when yOu release the nut (_), use enclosed hex wrench (®)tO turn the bolt(@)inasl ghtly
counterclockwise direction: This will enable you to loosen the nut(@) with your fingers:
,_3_WRENCH
`1:,NUT ..................... d;, NUT
2) Please adjust the height difference between the doors by turning the bolt (@) clockwise (,_..,,,) or
counter clockwise ( _--...,_).
(_= When YOUturn clockwise (_), the door gOes uPl
,;, WRENCH ,_:,BOLT
,',3_',WRENCH
"S
-. . ",... ............. o...'""d;, NUT " ........................ ,!, NUT
3) After adjusting the doors, turn the nut clockwise ( _ ) until it reaches the lower end of the
bolt, then tighten the bolt again with the wrench (®) to fix the nut((lb).
f
,;, WRENCH ,3_',WRENCH
,',_:,BOLT ..'"'_
,. , y"
4", NUT .........................." ...................
If YOUdOn0t fiX the nut @)firmly,the bolt (@)may be release&
NOTE
23
...._lllllllllllllllllllllllllllllllllf_
_..:..,,,,,,,,1111111111111111111111111111111_
Loading ...
Loading ...
Loading ...