Loading ...
Loading ...
Loading ...
Reattaching the Water Supply Line
While pressing the front face of coupler (@), insert the water line ((b) in the coupler.
Carefully place front cover and push to snap it into position.
1) Push the "A" collar into the "B" body and hold. /
A_
Then pull tube from the connector.
Tube must be fully inseited to the
marked line to avoid leaks:
Reattaching the Front Leg Cover
Put on the front leg cover by turning the three screws clockwise, as shown in the figure.
Beforeattaching check water connector,be sure to check forleakage.
NOTE
...._lllllllllllllllllllllllllllllllllf_
_-:....,,,,,,,,,,,,,,,,,,,,,_
FRONTLEGCOVER
SCREW
21
Loading ...
Loading ...
Loading ...