Loading ...
Loading ...
Loading ...
5
Cleaning and maintenance
General Maintenance
Switch off the rangehood before cleaning or maintenance. To prevent surface damage never use
abrasive or oil based liquid cleaners. To clean the surfaces of the appliance, use mild detergent
and warm water. In areas of high humidity and coastal environments cleaning should be carried
out frequently.
Warning: a build up of oil may occur if the compact canopy is not cleaned regularly.
Filter Maintenance
To maintain efficiency, the filters should be removed regularly (approximately monthly), and washed
using hot soapy water or the dishwasher. Note - some discolouration of the frame may occur if
washed in the dishwasher.
To remove the filters from their locations you will need to release the anchoring points as shown
below, to install is the reverse of the removal.
Replacement of LED Lamps – RSA2CL6SS & RSA2CL9SS models
To replace a lamp, first disconnect the rangehood from the power supply and ensure the lamp has had
time to cool down before touching.
Parts and Accessories list
LED Light Assembly 114542
For any other problems please call help line on NZ 0800 760 667 or AUS 1800 648 556
Remove the filters as described above
and unclip the cable connector and
squeeze the two clips holding the lamp
in place and remove. Installation is
reverse of this process.
Loading ...
Loading ...
Loading ...