Loading ...
Loading ...
3
Pre-Installation - continued
Ducting Options
The method of ducting should be carefully considered before installing the rangehood. The guide below
recommends the ducting components to use for all common ducting configurations - through the top of the
home (for the roof and soffit) and through the rear of the home.
150mm round ducting should be used in conjunction with this model rangehood.
Due to the high airflow with this rangehood there is not a re-circulating option available.
Duct mounting option
Rear
Top (roof)
Top (soffit/eave)
Uniduct item numbers
Uniduct Kit
UTWSR150
UHRS150
USSR150
It is recommended that Ø150mm ducting is to be used, however a reducer from Ø150mm to Ø125mm
is included with the Uniduct kit should Ø125mm ducting be required.
Extra lengths and/or bends may be required, depending on the length required and whether there is any
structural material in the run e.g. rafters. For best performance the maximum distance between coupling and
discharge outlet should not exceed 3 metres, with one 90 degree bend.
Some authorities require rangehoods to be vented outside. Ducted models should comply with this requirement in
every respect.
Please note that this chart is designed as a guide. Please consult Robinhood customer services if unsure.
For NZ phone 0800 760 667 or www.robinhood.co.nz. For AUS phone 1800 648 556 or www.robinhood.com.au.
Loading ...
Loading ...
Loading ...