Masterforce 2100294VTBT OPERATOR’S MANUAL

Loading ...

Page 12

ADJUST THE LENGTH OF THE

CUTTING LINE

While you operate the machine, the cutting

line gets worn shorter. You can adjust the

length of the cutting line.

1. Bump the trimmer head against the ground

while you operate the machine.

2. Line is automatically released and the cut-

off blade cuts the excess length.

INSTALL TRIMMER LINE IN THE

STRING TRIMMER HEAD

1. Line up the slots on the spool cap with the

slots on the string trimmer head.

OPERATION

FIG. 3

FIG. 4

2. Insert 15 feet or less of trimmer line through

the string trimmer head hole. Push line until

it exits through the opposite hole.

3. Pull the line through until there is an equal

amount of line on each side of the string

trimmer head.

4. Turn the spool cap clockwise to begin

winding the line into the string trimmer

head. Leave approximately 5 inches of line

protruding out of each side of the head.

It is recommended that 0.080"/0.095"

diameter line be used for this string trimmer

head.

FIG. 5

FIG. 6

Loading ...

Masterforce 2100294VTBT 16" 80-Volt Brushless Cordless String Trimmer