Masterforce 2100294VTBT OPERATOR’S MANUAL

Loading ...

Page 11

LOCK-OUT SWITCH

The lock-out switch reduces the possibility

of accidental starting. The lock-out switch is

located on the handle above the switch trig-

ger. The lock-out switch must be depressed

before you pull the switch trigger. The lock

resets each time the trigger is released.

START / STOP THE TRIMMER

1. Ensure a fully charged battery is installed

into the string trimmer.

2. To start the string trimmer, press and hold

the lock-out switch (1) and squeeze the

switch trigger (2).

3. Push the speed switch (3) to the desired

operating speed. Push the speed switch

to position 1 for low speed or position 2 for

high speed.

OPERATION TIPS

• Hold the string trimmer with your right hand

on the rear handle and your left hand on

both hands while in operation. Power head

should be held at a comfortable position

with the rear handle about hip height.

• Always operate power head at full throttle.

If debris becomes wrapped around the

string trimmer head, release the switch

trigger, and remove the debris.

Any contact with the cutting head can result

in burns and/or other serious personal injury.

Never use a brush cutter head with this

trimmer.

OPERATION

WARNING

FIG. 1

FIG. 2

Loading ...

Masterforce 2100294VTBT 16" 80-Volt Brushless Cordless String Trimmer