Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE(S) SOLUTION
Water inlet hoses are not
connected correctly.
Make sure the inlet hoses are
properly connected (hot to hot
and cold to cold).
Water leaks Water hose connections are
not tight.
Make sure the inlet hose
connections at the faucets
and washer are tight.
Drain hose connection is
not secure or the hose is
not properly positioned in
the drain.
Make sure the drain hose
connection at the washer is
secure and that the drain hose
is properly positioned at the
drain location.
Undetermined water leaks Call a qualied plumber.
Water will not
drain from
washer
Drain hose is not properly
connected to the washer.
Reconnect drain hose to the
washer.
Drain hose is not positioned
properly.
In order to drain properly, the
top of drain outlet must not be
higher than 60" (153 cm)
above the oor.
Sink or drainpipe is clogged. Remove blockages from the
sink or drainpipe.
Water runs out
of drain hose
when tub is
lling
The end of the drain hose is
too low.
NOTE: If the end of
the drain hose is lower
than the maximum tub
water level, the wash
tub will not ll or hold
water properly.
Position the top of the drain
hose so that it is at least 39"
(99 cm) above the oor.
NOISE
PROBLEM
POSSIBLE CAUSE(S) SOLUTION
Thumping Wash load may be
unbalanced.
Pause the washer and
redistribute items in the wash
basket.
Washer may not be level. Level the washer. See “Level
the Washer.”
Rattling or
Clanking
Coins, buttons or other
foreign objects may be in
the washer.
Stop the washer and check for
keys or coins and other foreign
objects.
Squealing Washer may be overloaded. Stop the washer and remove
part of the wash load.
Vibration Washer may not be level. Check that all four legs are
resting rmly on the oor and
that the washer is level.
33
ENGLISH
Loading ...
Loading ...
Loading ...