Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
First try the solutions suggested here to possibly avoid the cost of a service call.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
ERROR CODES
When the washer senses an error all machine operations will stop, a series of
4 beeps will sound and an error code will be shown in the Estimated Time remaining
display.
ERROR CODE
DESCRIPTION POSSIBLE CAUSE AND
SOLUTION
dO
(Washer Lid is
Open)
The washer has detected
that the lid is open.
If the lid is opened during the
wash cycle, the wash cycle will
stop. Closing the lid should
dismiss the error and resume
normal operation.
Ld
(Too Long to
Drain)
The washer has detected
that it is taking too long to
completely drain water
from the wash tub.
See Water in the
“Troubleshooting” section.
Call service center at
1-877-337-3639.
UL
(Unbalanced
Load)
The washer has detected
an out of balance load and
has failed to self-correct
the condition.
Open the washer lid,
redistribute the load, close the
lid, and press the Start/Pause
button to resume operation.
The washer is not level
from side to side, or from
front to back.
Level the washer, open and
close the washer lid and press
the Start/Pause button to
resume operation.
LF
(Too Long to
Fill)
The washer senses that it
is taking too long to ll the
wash tub or does not read
a change in water level
during a ll.
See Water in the
“Troubleshooting” section.
Check for water leakage.
Call service center at
1-877-337-3639.
31
ENGLISH
Loading ...
Loading ...
Loading ...