Loading ...
Loading ...
Loading ...
MECHANICAL SETTINGS
2)
2)
Connect the parallel interface
cable to the parallel interface port
of the MFC machine. (Q)
Secure the connection with the
wire clips. (Q)
Connect the interface cable to the
printer port of the computer.
NOTE
You can use the optional RS-232C/RS-422A serial interface board (Part No.:RS100M).
However, installing the RS100M optional interface board will not allow PC faxing and
scanning on an Apple Macintosh computer.
For the location of your computer's parallel (or serial, if you are using the optional
interface board) printer port, see the User's Guide for your computer.
E. Connecting a Telephone Answering Device (TAD)
Hooking Up the Telephone Answering Device
There is only one way you can hook up a Telephone Answering Device (TAD) on the
fax phone line. The TAD _ be plugged into the back of the MFC machine
in the jack labeled EXT. Your MFC machine can not work properly if you plug the
TAD into a wall jack. Follow these steps:
1. Plug the telephone line cord from the wall jack into the back of the MFC machine
in the jack labeled LINE.
2. Plug the telephone line cord from your TAD into the back of the MFC machine in
the jack labeled EXT, (Double check that the telephone line cord comes from the
jack in the TAD for telephone line and not for telephone set.)
Please review the operation and receiving mode sections for more details on using
Telephone Answering Devices (TAD).
(See "Operations Manual for Fax, Printer, Copier page 6-17-20.)
]1111 __till ..... III I I I II
III
2-8
Loading ...
Loading ...
Loading ...