Loading ...
Loading ...
DWL-8720AP Quick Installation Guide
1
ENGLISH
Hardware Overview
LED Indicators
Label Area
1 2 3 4
Figure 1: LED Indicators
Note: For the LED positions, please unscrew
the protective cap to line up the device with
the diagram above.
# LED Description
1 LAN (PoE)
Green (Solid) - Link preset
Green (Flashing) - Sending or
receiving packets
2 2.4 GHz
Green (Solid) - Device’s 2.4 GHz
band is operating successfully
Green (Flashing) - Sending or
receiving packets
3 5 GHz
Green (Solid) - Device’s 5 GHz
band is operating successfully
Green (Flashing) - Sending or
receiving packets
4 Power
Green (Solid) - Device operational
Red (Solid) - Device is booting up
or has malfunctioned
Table 1: LED Description
Before You Begin
This installation guide provides instructions for
installing the DWL-8720AP on your network.
Additional documentation is also available on
the D-Link support website.
Package Contents
This DWL-8720AP package includes the
following items:
• DWL-8720AP Access Point
• Mounting Plate and Hardware (U-bolts and
nut fasteners, screws and washers)
• Grounding Wire
• Console Cable
• Quick Start Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: To power the unit, use an 802.3af or
802.3at PoE wwitch or PoE injector. This product
is intended to be supplied by a LPS (Limited
Power Source) marked UL Listed Power Unit,
and its output is rated at 48 V DC (PoE), 0.6 A
min., and has a TMA of 60
o
C.
System Requirements
• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter.
• Internet Explorer 11, Safari 7, Firefox 28,
or Google Chrome 33 and above (for
configuration).
Loading ...
Loading ...
Loading ...