Loading ...
Loading ...
Loading ...
Advanced Features
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
• You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
Tile Modem Port oil tile Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied) LAN Oab]e {Not Supplied)
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use a Oat 5 cable for the connection. See the diagram below.
TheModemPortoil theWall TV RearPanel
ExternalModem IPSharer
(ADSL/ VDSL/ CableTV) (havingDHOPserver)
J i
Modem Cable (Not SuppJied) LAN Cable (Not Supplied) LAN Cable (Not Supplied)
_JJ
The LAN Port on the Wall
iiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiii
LAN Cable (Not Supplied)
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and reuters that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don't have to enter them manually. Most home networks are
Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV's Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
English 29
Loading ...
Loading ...
Loading ...