Loading ...
Loading ...
Loading ...
Fig. 8
u
Remove the existing covers.
u
Slide the bracket
Fig. 8 (6)
on with the spacer between the
appliances and screw in loosely with the 4 screws
Fig. 8 (4)
.
u
If necessary line the appliances up again.
u
Now tighten the screws firmly at the top and bottom.
Top back of the appliance:
Fig. 9
u
Slide the bracket
Fig. 9 (7)
onto the top of the appliance with
the lugs and with the spacer between the appliances. Screw
in firmly with the 2 screws
Fig. 9 (5)
.
Bottom back of the appliance:
Fig. 10
NOTICE
Holes for the screws must be pre-drilled.
u
Slide the bracket
Fig. 10 (8)
on with the slots over the
retainer for the wall spacers.
u
Mark the position of the holes to be drilled with a pencil.
u
Remove the bracket again.
Fig. 11
NOTICE
Only drill through the metal plate. Drilling depth approx. 1mm.
u
Pre-drill the screw holes with a 3 mm drill and deburr.
Fig. 12
u
Slide the bracket
Fig. 12 (8)
on once more with the slots over
the retainer for the wall spacers.
u
Screw in tightly with the 2 screws
Fig. 12 (5)
.
Before fitting the top and front cover strips, push the two bars
together over the whole length. The strips can be inserted more
easily into the gap. Use a soft cloth to push the strips in to avoid
dents in the surface of the cover strips. Press the strips into the
gap carefully and evenly in order to achieve an optimum bond.
Side-by-side assembly
4 * Depending on model and options
Loading ...
Loading ...