Loading ...
Loading ...
Loading ...
Option I:
1. Place a sturdy glass below the dispenser opening.
2. To dispense water, press the DISPENSE WATER button. Hold the glass
close to the water dispenser spout to ensure that the water dispenses
into the glass.
A. Water dispenser spout
3. To stop dispensing, press the DISPENSE WATER button a second time.
Option 2:
1. Press the WATER/ICE button until "Water" is selected.
2. Press a sturdy glass against the dispenser pad. Hold the glass close to
the water dispenser spout to ensure that the water dispenses into the
glass.
_A
A. Water dispenser spout
3. Remove the glass to stop dispensing.
To Dispense Water (Measured Fill):
Measured Fill allows you to dispense a specified amount of water with the
touch of a few buttons.
NOTE: The amount of water you select will be dispensed. Be sure that the
container is empty and can hold the entire volume. If ice is in the container,
you may need to adjust your selection.
IMPORTANT: Low water pressure may affect the accuracy of this feature.
1. Press MEASURED FILL to turn the feature on. When the feature is on,
the Measured Fill screen appears on the display.
2.
3.
4.
Press WATER/ICE to manually turn off the Measured Fill feature.
NOTE: The dispenser will automatically turn off Measured Fill after 1
minute of inactivity. When Measured Fill is turned off, any changes you
have made will be lost and all defaults will be restored.
You can dispense water by the ounce, cup, or liter. The default unit is
ounces. To switch to cups or liters while the Measured Fill feature is
already on, press the MEASURED FILL button to toggle through the
available units.
Default, minimum, and maximum volumes are listed below.
Units Default Minimum Maximum
Ounces 8 1 128
Cups 1 1/4 16
Liters 0.25 0.05 4.00
Press the SETTINGS and TEMPERATURE buttons to adjust the volume
as desired. The SETTINGS button increases the volume, and the
TEMPERATURE button lowers the volume.
NOTES:
• When increasing or decreasing the volume of water, the control
may stop responding if an adjustment button is held for
approximately 10 seconds or longer. Release the button for
approximately 2 seconds, then continue making adjustments.
• Most coffee cups (commonly 4 to 6 oz [118 to 177 mL] per cup)
are not the same size as a measuring cup (8 oz [237 mL]). You
may need to adjust the volume to avoid unintentionally overfilling
coffee cups.
You can save one "favorite" volume for repeated use. Adjust the
settings until the desired volume is displayed, then press LOCI< to save
the volume. In future Measured Fill use, press LOCI< to access the
saved volume setting.
NOTE: You can only save one "favorite." Saving a new volume will
overwrite the previously-saved "favorite."
19
Loading ...
Loading ...
Loading ...