Loading ...
Loading ...
Loading ...
Location 2:
Install the other filter in the filter housing assembly_ which is located along
an interior side wall of the crisper and/or convertible drawer.
NOTE: There are two housing assemblies. Use one for one of the
CleanFIow TM Air Filters, and use the other for the Crisperl<eeper TM Produce
Preserver pouches. Do not install Air Filters and Produce Preserver pouches
in the same housing assembly. See "Install Crisperl<eeper TM Produce
Preserver" for additional information.
1. Remove the air filter from its packaging.
2. Lift up on the housing in order to remove it from its mounting tab
along the wall.
3. Snap the filter into place on the rear of the housing.
4. Place the housing back on the mounting tab along the wall.
Installing the Filter Status Indicators (on some models)
Each filter comes with a status indicator_ which should be activated and
installed at the same time the air filter is installed.
Location 1:
1. Place the indicator face-down on a firm, flat surface.
2. Apply pressure to the bubble on the back of the indicator, until the
bubble pops to activate the indicator.
3. Lift open the vented air filter door. There are notches behind the door.
Slide the indicator down into the notches, facing outward.
NOTE: The indicator will not easily slide into the notches if the rear
bubble has not been popped.
4. Close the air filter door, and check that the indicator is visible through
the rectangular hole in the door.
Location 2:
1. Place the indicator face-down on a firm, flat surface.
2. Apply pressure to the bubble on the back of the indicator until the
bubble pops to activate the indicator.
3. Slide open the cap on the housing assembly.
4. Place the indicator in the top of the housing, facing outward.
5. Slide the cap closed, and check that the indicator is visible through
the rectangular hole in the cap.
NOTE: The cap will not easily close if the indicator's rear bubble has
not been popped.
Replacing the Air Filter
The disposable air filter should be replaced every 6 months, when the
status indicator has completely changed from white to red.
To order a replacement air filter, see "Accessories."
1. Remove the old air filter by squeezing in on the side tabs.
2. Remove the old status indicator.
3. Install the new air filter and status indicator using the instructions
in the previous sections.
_'__ _:_'}_s/_'{%;__:_,}_,__s,, li_'_OC__;t?ye _,_,__st_;s_}/y_,__ _,
On some models, your refrigerator's accessory packet includes a Produce
Preserver, which should be installed prior to use. On some models, the
Produce Preserver is already installed at the factory.
The Produce Preserver absorbs ethylene, allowing the ripening process of
many produce items to slow down. As a result, certain produce items will
stay fresh longer.
Ethylene production and sensitivity varies depending on the type of fruit
or vegetable. To preserve freshness, it is best to separate produce with
sensitivity to ethylene from fruits that produce moderate to high amounts
of ethylene.
Apples
Asparagus
Berries
Broccoli
Cantaloupe
Carrots
Citrus Fruit
Grapes
Lettuce
Pears
Spinach
Sensitivity to
Ethylene
High
Med.
Low
High
Med.
Low
Med.
Low
High
High
High
Ethylene
Production
Very High
Very Low
Low
Very Low
High
Very Low
Very Low
Very Low
Very Low
Very High
Very Low
14
Loading ...
Loading ...
Loading ...