Loading ...
Loading ...
Loading ...
5
ENgLish
4
Connect spray Wand to
spraygun
Thread the spray wand into the end of
the spraygun.
5
Connect QC Nozzles to
sprayWand
Pull quick connect coupler back and
insert nozzle. Release quick connect
coupler and twist nozzle to make sure
it is secure incoupler.
6
Turn Water Faucet
CompletelyOn
Do not run the unit without water
supply connected and turned on. Use
Cold WaterOnly.
7
Release Air from system
Release all air from pump and high
pressure hose by depressing trigger
until a steady stream of water is
present. Approximately 30seconds.
8
Start engine. See Engine Owner’s Manual for correct procedure.
30 S
WARNING: This Guide is not a substitute for reading the operator’s manual. User must read and understand operator’s
manual before using thisproduct.
Loading ...
Loading ...
Loading ...