Loading ...
Loading ...
Loading ...
9
ENgLish
DANGER: RISK OF CHEMICAL BURN
WhAT CAN hAPPEN hOW TO PREVENT iT
• Use of acids, toxic or
corrosive chemicals,
poisons, insecticides,
or any kind of
flammable solvent
with this product
could result in serious
injury ordeath.
• Do not spray acids,
gasoline, kerosene, or any
other flammable materials
with this product. Use only
household detergents,
cleaners and degreasers
recommended for use with
pressurewashers.
• Wear protective clothing
to protect eyes and
skin from contact with
sprayedmaterials.
WARNING: RISK OF BURSTING
WhAT CAN hAPPEN hOW TO PREVENT iT
• Over inflation of
tires could result in
serious injury and
propertydamage.
• Use a tire pressure gauge
to check the tires pressure
before each use and while
inflating tires; see the tire
sidewall for the correct tire
pressure.
NOTE: Air tanks, compressors
and similar equipment used to
inflate tires can fill small tires
similar to these very rapidly.
Adjust pressure regulator on
air supply to no more than the
rating of the tire pressure. Add
air in small increments and
frequently use the tire gauge to
prevent overinflation.
• High-velocity fluid
spray directed
at pneumatic
tire sidewalls
(such as found
on automobiles,
trailers and the like)
could damage the
sidewall resulting in
seriousinjury.
• On pressure washers rated
above 1600psi (11032kPa)
use the widest fan spray
(40º nozzle) and keep
the spray a minimum of
8" (200 mm) from the
pneumatic tire sidewall. Do
not aim spray directly at
the joint between the tire
andrim.
Get to Know the Pressure Washer
NOTE: Photographs and line drawings used in this
manual are for reference only and do not represent a
specificmodel.
Compare the illustrations with your unit to familiarize yourself
with the location of various controls and adjustments. Save
this manual for future reference.
Basic Elements of a Pressure Washer
(Fig.A, H)
1
high Pressure Pump: Increases the pressure of the
watersupply.
2
Engine: Drives the high pressure pump. Refer to the
Engine Owner’s Manual for location and operation of
enginecontrols.
3
high Pressure hose: Carries the pressurized water from
the pump to the gun and spray wand.
4
spray gun: Connects with spray wand to control water
flow rate, direction, andpressure.
5
Quick-Connect spray Wand: Allows the user to quickly
change out high pressure nozzles. See how To Use
spray Wand instructions in Operationsection.
6
Detergent siphon hose (Fig. i)): Feeds cleaning
agents into the pump to mix with the water. See how
To Apply Chemicals/Cleaning solvents instructions in
Operationsection.
7
handle
8
Frame
9
Pump Outlet
WARNING: RISK OF HOT SURFACES
WhAT CAN hAPPEN hOW TO PREVENT iT
• Contact with hot
surfaces, such as
engines exhaust
components, could
result in seriousburn.
• During operation, touch
only the control surfaces of
the pressure washer. Keep
children away from the
pressure washer at all times.
They may not be able to
recognize the hazards of
thisproduct.
WARNING: RISK OF INJURY FROM LIFTING
WhAT CAN hAPPEN hOW TO PREVENT iT
• Serious injury
can result from
attempting to lift too
heavy anobject.
• The pressure washer is too
heavy to be lifted by one
person. Obtain assistance
from others beforelifting.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
Loading ...
Loading ...
Loading ...