Loading ...
Loading ...
Loading ...
ENgLish
14
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• CONFiRMATiON OF OWNERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof ofpurchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
Register online at www.craftsman.com/registration
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performingthis.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into aliquid.
Repairs
WARNING:To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a CRAFTSMAN factory service center
or a CRAFTSMAN authorized service center. Always use
identical replacementparts.
To find the nearest service center, please contact CRAFTSMAN,
call 1-877-362-4271.
Accessories
DANGER: Risk of fluid injection. When using
replacement spray wands or guns with this pressure
washer, DO NOT use a spray wand and/or spray gun/
wand combination that is shorter in length than what
was provided with this pressure washer as measured
from the nozzle end of the wand to the guntrigger.
WARNING: Since accessories, other than those
offered by CRAFTSMAN, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
CRAFTSMAN recommended accessories should be used
with thisproduct.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact CRAFTSMAN, call 1-877-362-4271.
Pump
The manufacturer recommends using SIMPSON
®
/
POWERWASHER
®
Pump Guard or equivalent when storing
the unit for more than 30 days and/or when freezing
temperatures are expected. SIMPSON
®
/ POWERWASHER
®
Pump Guard is environmentallyfriendly.
NOTE: Using pump guard helps provide proper lubrication
to the internal seals of the pump regardless of temperature
or environment.
NOTICE: Risk of property damage. Use only SIMPSON®
/ POWERWASHER® Pump Guard or equivalent. Other
products could be corrosive and/or contain alcohol
which may cause pumpdamage.
1. Turn off pressure washer and disconnect hoses
frompump.
2. Unscrew bottle valve from Pump Guard bottle and
remove seal.
3. Screw bottle valve back ontobottle.
4. Attach bottle to water inlet ofpump.
5. Squeeze bottle to inject contents intopump.
6. With ignition switch off, simultaneously pull starter rope
and squeeze bottle. Repeat until protector fluid exits
pump outlet. NOTE: This step may require twopeople.
Pressure Washer
1. Drain all water from high pressure hose and wrap it onto
hosewrap.
2. Drain all water from the spray gun and wand by holding
spray gun in a vertical position with nozzle end pointing
down and squeezing trigger. Store in gunholder.
3. Wrap up and secure detergent siphon hose so it is
protected fromdamage.
Loading ...
Loading ...
Loading ...