Loading ...
Loading ...
Loading ...
ASSEMBLY
HH,= ='============ == n
CONNECT BATTERY (See Figs. 2 and 3)
CAUTION: Do not short battery termi-
nals. Before connecting battery, re-
move metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
,,n, i in=
• Lift seat pan to raised position.
• Open battery box door.
o Be sure battery drain tube is attached to battery box.
° Remove terminal protective caps and discard.
- If this battery is put into service after month and year
indicated on labet (label tocated between terminals)
charge battery for minimum of one hour at 6-10 amps.
- First connect RED battery cable to positive (+) terminal
with hex bolt, flat washer, lock washer and hex nut as
shown. Tighten securely.
• Connect BLACK grounding cable to negative (-) termi-
nalwith remaining hex bolt, flat washer, lock washer
and hex nut. Tighten securely.
° Ctose battery box door.
Open battery box door for:
• lnspectien for secure connections (to tighten hard-
ware).
- Inspection for corrosion.
• Testing battery.
o Jumping ({f required).
, Periodic charging.
LOCK
HEX WASHER
NUT
FLAT
WASHER
DISCARD
• TERMINAL
PROTECTIVE
CAPS
POSITIVE
(RED) CABLE
t
BOLT
NEGATIVE
(BLACI_ CABLE
RG. 2
\
VENT
SEAT
PAN
BOX DOOR
FIG. 3
=
INSTALL SEAT (See Fig. 4)
Adjust seat before tightening adjustment bolt.
° Remove cardboard packing on seat pan.
= PIace seat on seat pan and assemble shoulder boff,.
= Assemble adiustment bolt, lock washer and flat washer
Ioosety. Do not tighten.
. Tighten shoulder bolt securely.
- Lower seat into operating position and sit on seat.
• Slide seat until a comfortable position is reached which
allows you to press dutch/brake pedal all the way
down.
° Get off seat without moving its adjusted position.
° Raise seat and tighten adjustment bolt securely.
SHOULDER
BOLT
_ LOCK WASHER
ADJUSTMENT LARGE FLAT WASHER
BOLT
SEAT PAN SEAT_
F{G. 4
Loading ...
Loading ...
Loading ...