Loading ...
Loading ...
Loading ...
, i.i i. . i ,._rl. i.-i i ii.,. I n JI =¸1== .i ii Hn
SERVICE AND ADJUSTMENTS
_.tUUl i i H nl n ..uH i Hpl .umn .,....J,l..,m i . ii ii ii ..n. I I
HI ii _ i i i iiii nUl n ,,,,,,,11 i Ul H,I,Hn I ....... n,,
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift lever in neutral (N) position.
Place attachment clutch in "DISENGAGED" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
, Disconnect spark plug wire from spark plug and place wire where itcannot come in contact with
plug.
,H, i i .i n i 1.1.1, . i ii, ,,..., ,,,,,,,,,, H.,..,i
•
o
TRACTOR
TO REMOVE MOWER (See Fig. 20)
Mower will be easier to remove from the dght side of tractor.
• PIace attachment dutch in "DISENGAGED" position.
• Move attachment lift Iever forward to lower mower to its
lowest position.
• Roll bett off engine puItey.
• Disconnect clutch rod from clutch lever by removing
retainer spring.
• Disconnect anti-sway bar from chassis bracket by
removing retainer spring.
• Disconnect suspension arms from rear deck brackets
by removing retainer springs.
• Disconnect front links from deck by removing retainer
springs,
• Raise lift lever to raise suspension arms. Slide mower
out from under tractor.
IMPORTANT; IF"AN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED TO THE TRACTOR, THE
R.H. AND L,H, SUSPENSION ARMS MUST BE REMOVED
FROM TRACTOR.
TO INSTALL MOWER (See Fig. 20)
° Raise attachment lift lever to its highest position.
, Slide mower undertractorwfth discharge guard to right
side of tractor.
, Lower !ift Iever to its Iowest position.
° Install mower in reverse order of removal instructions.
CLUTCH
RETAINER
SPRING
RETAINER
SPRINGS
{BOTH SII_ES)
FIG. 20
2O
Loading ...
Loading ...
Loading ...