Loading ...
Loading ...
Loading ...
7 pe 2 bulb
replacement
NOTE: Before replacing the bulbs, review
the light bulb information and X_SkRNING
on page 20.
Replacing Type 2 bulbs in lamps located in the
top of the Climate Control drawer:
1°
°
Set the Master I,ight switch to the OFF
position (see Using the Master L_ht switch)
and allow the lamps to cool.
To access the lamps, remove the second
produce pan. See Drawer and Pan Removal
section.
3°
4°
The lamps at the back, that face tap, can be
lifted out. To access the lamp that shines
into the Climate Control drawer; twist the
holder until the arrow points towards the
back of the refiigeratot; then lift up.
Turn the lamp
protector to
access the bulb.
NOTE: Ah,vays follow bulb manufacturer's
directions for handling and replacing bulbs.
5. Remove the bulb by holding the base and
pulling straight out. Replace with a new bulb
and replace the lamp protector.
WARNING - L.mpprotectors
Illtlst be replaced or the heat flom the bulb
could damage the refligeratot.
AVERTISSEMENT :
Vous devez remettre en place les _crans
protecteurs des ampoules pour ne pas
endommager votre r_flig_rateur avecla
chaleur produite pax les ampoules.
6. Reset the Master Ifight switch to the ON
position.
ClimateControldrawer lamp
23
Loading ...
Loading ...
Loading ...