Loading ...
Loading ...
Loading ...
STORAGE
17
B
D
A
C
B
A
Grasp Here
To Move
a. Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat.
NOTE: This will prevent the seat from damaging the covers.
b. Remove the PULL PIN(63) and swing the REAR SUPPORT(62) toward the front.
NOTE: This will allow you to pull out the RELEASE KNOB(59) easily.
c. Pull out the RELEASE KNOB(59) and fold up the RAIL(52). Make sure the RAIL(52) is locked securely
in folded position by RELEASE KNOB(59).
d. Lock the REAR SUPPORT(62) in folded position with the PULL PIN(63).
UNFOLD THE Stamina® Conversion II Recumbent Bike/Rower
a. Pull out the RELEASE KNOB(59) and unfold the RAIL(52). Make sure the RAIL(52) is locked securely
in the unfolded position by RELEASE KNOB(59).
b. Remove the PULL PIN(63) and swing the REAR SUPPORT(62) backward, then lock the REAR SUPPORT
(62) in position with the PULL PIN(63).
1. To store the Stamina® Conversion II Recumbent Bike/Rower, simply keep it in a clean dry place.
2. To avoid damage to the electronics, remove the battery before storing the Stamina® Conversion II
Recumbent Bike/Rower for one year or more.
3. Move the Stamina® Conversion II Recumbent Bike/Rower with the MOVING WHEELS(76) on the
FRONT STABILIZER(2). Grasp the RAIL CAP(55) to move the Stamina® Conversion II Recumbent
Bike/Rower. Do not use the Seat to move the Stamina® Conversion II Recumbent Bike/Rower.
The Seat will move and the Seat Carriage may pinch your hand or ngers.
4. The minimum folded dimensions of the Stamina® Conversion II Recumbent Bike/Rower are
approximately 36.1 inches long x 23 inches wide x 57.8 inches tall. Please measure your Stamina®
Conversion II Recumbent Bike/Rower if exact dimensions are needed.
5. Follow the illustrated process below to fold the Stamina® Conversion II Recumbent Bike/Rower.
Loading ...
Loading ...
Loading ...